Friction behaviors in the metal cutting process: state of the art and future perspectives

Xiaoliang Liang; Zhanqiang Liu; Bing Wang; Chunjin Wang; Chi Fai Cheung

doi:10.1088/2631-7990/ac9e27

PDF
Cite
Share

facebook

twitter

google

linkedin

Wechat

Wechat

Volume 5 Issue 1

Jan. 2023

Article Contents

Article Navigation > International Journal of Extreme Manufacturing > 2023 > 5(1): 012002

Liang X L, Liu C Q, Wang B, Wang C J, Cheung C F. 2023. Friction behaviors in the metal cutting process: state of the art and future perspectives. Int. J. Extrem. Manuf. 5 012002.

Citation:

Liang X L, Liu C Q, Wang B, Wang C J, Cheung C F. 2023. Friction behaviors in the metal cutting process: state of the art and future perspectives. Int. J. Extrem. Manuf. 5 012002.

Friction behaviors in the metal cutting process: state of the art and future perspectives

doi: 10.1088/2631-7990/ac9e27

Xiaoliang Liang^1,2,3,
Zhanqiang Liu^{1,2
,
,},
Bing Wang^1,2,
Chunjin Wang³,
Chi Fai Cheung^{3
,
,}

More Information

1. Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan 250061, People's Republic of China;
2. Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, People's Republic of China;
3. State Key Laboratory of Ultra-Precision Machining Technology, Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Kowloon, Hong Kong, People's Republic of China

Publish Date: 2023-01-30

Abstract

Material removal in the cutting process is regarded as a friction system with multiple input and output variables. The complexity of the cutting friction system is caused by the extreme conditions existing on the tool–chip and tool–workpiece interfaces. The critical issue is significant to use knowledge of cutting friction behaviors to guide researchers and industrial manufacturing engineers in designing rational cutting processes to reduce tool wear and improve surface quality. This review focuses on the state of the art of research on friction behaviors in cutting procedures as well as future perspectives. First, the cutting friction phenomena under extreme conditions, such as high temperature, large strain/strain rates, sticking–sliding contact states, and diverse cutting conditions are analyzed. Second, the theoretical models of cutting friction behaviors and the application of simulation technology are discussed. Third, the factors that affect friction behaviors are analyzed, including material matching, cutting parameters, lubrication/cooling conditions, micro/nano surface textures, and tool coatings. Then, the consequences of the cutting friction phenomena, including tool wear patterns, tool life, chip formation, and the machined surface are analyzed. Finally, the research limitations and future work for cutting friction behaviors are discussed. This review contributes to the understanding of cutting friction behaviors and the development of high-quality cutting technology.
Keywords

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(1)

Get Citation

PDF

XML

Article Metrics

Article views(612) PDF Downloads(95) Citation(0)

Friction behaviors in the metal cutting process: state of the art and future perspectives

doi: 10.1088/2631-7990/ac9e27

1. Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan 250061, People's Republic of China;

2. Key National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, People's Republic of China;

3. State Key Laboratory of Ultra-Precision Machining Technology, Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Kowloon, Hong Kong, People's Republic of China

Publish Date: 2023-01-30

Key words:

Abstract:

Material removal in the cutting process is regarded as a friction system with multiple input and output variables. The complexity of the cutting friction system is caused by the extreme conditions existing on the tool–chip and tool–workpiece interfaces. The critical issue is significant to use knowledge of cutting friction behaviors to guide researchers and industrial manufacturing engineers in designing rational cutting processes to reduce tool wear and improve surface quality. This review focuses on the state of the art of research on friction behaviors in cutting procedures as well as future perspectives. First, the cutting friction phenomena under extreme conditions, such as high temperature, large strain/strain rates, sticking–sliding contact states, and diverse cutting conditions are analyzed. Second, the theoretical models of cutting friction behaviors and the application of simulation technology are discussed. Third, the factors that affect friction behaviors are analyzed, including material matching, cutting parameters, lubrication/cooling conditions, micro/nano surface textures, and tool coatings. Then, the consequences of the cutting friction phenomena, including tool wear patterns, tool life, chip formation, and the machined surface are analyzed. Finally, the research limitations and future work for cutting friction behaviors are discussed. This review contributes to the understanding of cutting friction behaviors and the development of high-quality cutting technology.