| Yang Y, Song X, Li X, Chen Z, Zhou C, Zhou Q and Chen Y 2018 Recent progress in biomimetic additive manufacturing technology:from materials to functional structures Adv. Mater. 301706539 |
| Yeo S J, Oh M J and Yoo P J 2019 Structurally controlled cellular architectures for high-performance ultra-lightweight materials Adv. Mater. 311803670 |
| Wang X, Xu S, Zhou S, Xu W, Leary M, Choong P, Qian M, Brandt M and Xie Y M 2016 Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants:a review Biomaterials 83127-41 |
| Thompson M K et al 2016 Design for additive manufacturing:trends, opportunities, considerations, and constraints CIRP Ann.-Manuf. Technol. 65737-60 |
| Sun Y, Li Q M, Lowe T, McDonald S A and Withers P J 2016 Investigation of strain-rate effect on the compressive behaviour of closed-cell aluminium foam by 3D image-based modelling Mater. Des. 89215-24 |
| Wang Z, Liu X, Shen X, Han N M, Wu Y, Zheng Q, Jia J, Wang N and Kim J K 2018 An ultralight graphene honeycomb sandwich for stretchable light-emitting displays Adv. Funct. Mater. 281707043 |
| Hanks B, Berthel J, Frecker M and Simpson T W 2020 Mechanical properties of additively manufactured metal lattice structures:data review and design interface Addit. Manuf. 35101301 |
| Rajagopalan S and Robb R A 2006 Schwarz meets Schwann:design and fabrication of biomorphic and durataxic tissue engineering scaffolds Med. Image Anal. 10693-712 |
| Feng J, Fu J, Shang C, Lin Z and Li B 2018 Porous scaffold design by solid T-splines and triply periodic minimal surfaces Comput. Methods Appl. Mech. Eng. 336333-52 |
| Yoo D 2012 New paradigms in internal architecture design and freeform fabrication of tissue engineering porous scaffolds Med. Eng. Phys. 34762-76 |
| Yoo D J 2014 Recent trends and challenges in computer-aided design of additive manufacturing-based biomimetic scaffolds and bioartificial organs Int. J. Precis. Eng. Manuf. 152205-17 |
| Wang Y 2007 Periodic surface modeling for computer aided nano design Comput. Des. 39179-89 |
| Yang N, Du C, Wang S, Yang Y and Zhang C 2016 Mathematically defined gradient porous materials Mater. Lett. 173136-40 |
| Zhou X, Jin Y and Du J 2020 Functionally graded scaffolds with programmable pore size distribution based on triply periodic minimal surface fabricated by selective laser melting Materials 135046 |
| Yang N, Quan Z, Zhang D and Tian Y 2014 Multi-morphology transition hybridization CAD design of minimal surface porous structures for use in tissue engineering Comput. Aided Des. 5611-21 |
| Yang N, Tian Y and Zhang D 2015 Novel real function based method to construct heterogeneous porous scaffolds and additive manufacturing for use in medical engineering Med. Eng. Phys. 371037-46 |
| Ma S, Song K, Lan J and Ma L 2020 Biological and mechanical property analysis for designed heterogeneous porous scaffolds based on the refined TPMS J. Mech. Behav. Biomed. Mater. 107103727 |
| Yoo D J 2012 Heterogeneous porous scaffold design for tissue engineering using triply periodic minimal surfaces Int. J. Precis. Eng. Manuf. 13527-37 |
| Yoo D 2013 New paradigms in hierarchical porous scaffold design for tissue engineering Mater. Sci. Eng. C 331759-72 |
| Ding J, Zou Q, Qu S, Bartolo P, Song X and Wang C C L 2021 STL-free design and manufacturing paradigm for high-precision powder bed fusion CIRP Ann. 70167-70 |
| Li Y, Xia Q, Yoon S, Lee C, Lu B and Kim J 2021 Simple and efficient volume merging method for triply periodic minimal structures Comput. Phys. Commun. 264107956 |
| Feng J, Fu J, Shang C, Lin Z, Xiaomiao N and Li B 2020 Efficient generation strategy of hierarchical porous scaffolds with freeform external geometries Addit. Manuf. 31100943 |
| Hu C and Lin H 2021 Heterogeneous porous scaffold generation using trivariate B-spline solids and triply periodic minimal surfaces Graph. Models 115101105 |
| Yoo D J 2011 Porous scaffold design using the distance field and triply periodic minimal surface models Biomaterials 327741-54 |
| Ataee A, Li Y, Fraser D, Song G and Wen C 2018 Anisotropic Ti-6Al-4V gyroid scaffolds manufactured by electron beam melting (EBM) for bone implant applications Mater. Des. 137345-54 |
| Li Y, Mao Q, Yin J, Wang Y, Fu J and Huang Y 2021 Theoretical prediction and experimental validation of the digital light processing (DLP) working curve for photocurable materials Addit. Manuf. 37101716 |
| Liang Y, Zhou W, Liu Y, Li Z, Yang Y, Xi H and Wu Z 2021 Energy absorption and deformation behavior of 3D printed triply periodic minimal surface stainless steel cellular structures under compression Steel Res. Int. 922000411 |
| Jones A, Leary M, Bateman S and Easton M 2021 Effect of surface geometry on laser powder bed fusion defects J. Mater. Process. Technol. 296117179 |
| Soyarslan C, Blümer V and Bargmann S 2019 Tunable auxeticity and elastomechanical symmetry in a class of very low density core-shell cubic crystals Acta Mater. 177280-92 |
| Zheng X, Guo X and Watanabe I 2021 A mathematically defined 3D auxetic metamaterial with tunable mechanical and conduction properties Mater. Des. 198109313 |
| DeValk T and Lakes R 2021 Poisson's ratio and modulus of gyroid lattices Phys. Status Solidi 2582100081 |
| Lu Y, Zhao W, Cui Z, Zhu H and Wu C 2019 The anisotropic elastic behavior of the widely-used triply-periodic minimal surface based scaffolds J. Mech. Behav. Biomed. Mater. 9956-65 |
| Bonatti C and Mohr D 2019 Mechanical performance of additively-manufactured anisotropic and isotropic smooth shell-lattice materials:simulations & experiments J. Mech. Phys. Solids 1221-26 |
| Barber H, Kelly C N, Nelson K and Gall K 2021 Compressive anisotropy of sheet and strut based porous Ti-6Al-4V scaffolds J. Mech. Behav. Biomed. Mater. 115104243 |
| Abueidda D W, Bakir M, Abu Al-Rub R K, Bergström J S, Sobh N A and Jasiuk I 2017 Mechanical properties of 3D printed polymeric cellular materials with triply periodic minimal surface architectures Mater. Des. 122255-67 |
| Maskery I, Sturm L, Aremu A O, Panesar A, Williams C B, Tuck C J, Wildman R D, Ashcroft I A and Hague R J M 2018 Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing Polymer 15262-71 |
| Al-Ketan O, Rowshan R and Abu Al-Rub R K 2018 Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials Addit. Manuf. 19167-83 |
| Lee D W, Khan K A and Abu Al-Rub R K 2017 Stiffness and yield strength of architectured foams based on the Schwarz primitive triply periodic minimal surface Int. J. Plast. 951-20 |
| Speirs M, van Hooreweder B, van Humbeeck J and Kruth J P 2017 Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison J. Mech. Behav. Biomed. Mater. 7053-59 |
| Kelly C N, Francovich J, Julmi S, Safranski D, Guldberg R E, Maier H J and Gall K 2019 Fatigue behavior of As-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering Acta Biomater. 94610-26 |
| Elmadih W, Syam W P, Maskery I, Chronopoulos D and Leach R 2019 Mechanical vibration bandgaps in surface-based lattices Addit. Manuf. 25421-9 |
| Viet N V and Zaki W 2021 Free vibration and buckling characteristics of functionally graded beams with triply periodic minimal surface architecture Compos. Struct. 274114342 |
| Maskery I, Aboulkhair N T, Aremu A O, Tuck C J and Ashcroft I A 2017 Compressive failure modes and energy absorption in additively manufactured double gyroid lattices Addit. Manuf. 1624-29 |
| Zhang L, Feih S, Daynes S, Chang S, Wang M Y, Wei J and Lu W F 2018 Energy absorption characteristics of metallic triply periodic minimal surface sheet structures under compressive loading Addit. Manuf. 23505-15 |
| Khan S Z, Masood S H, Ibrahim E and Ahmad Z 2019 Compressive behaviour of Neovius triply periodic minimal surface cellular structure manufactured by fused deposition modelling Virtual Phys. Prototyp. 14360-70 |
| de Oliveira A R, de Andrade Mendes Filho A, Masoumi M and del Conte E G 2021 Compression and energy absorption of maraging steel primitive scaffolds produced by powder bed fusion Int. J. Adv. Manuf. Technol. 1161271-83 |
| Gorgin Karaji Z, Speirs M, Dadbakhsh S, Kruth J P, Weinans H, Zadpoor A A and Yavari S A 2017 Additively manufactured and surface biofunctionalized porous nitinol ACS Appl. Mater. Interfaces 91293-304 |
| Ali D 2019 Effect of scaffold architecture on cell seeding efficiency:a discrete phase model CFD analysis Comput. Biol. Med. 10962-69 |
| Davoodi E, Montazerian H, Khademhosseini A and Toyserkani E 2020 Sacrificial 3D printing of shrinkable silicone elastomers for enhanced feature resolution in flexible tissue scaffolds Acta Biomater. 117261-72 |
| Lehder E F, Ashcroft I A, Wildman R D, Ruiz-Cantu L A and Maskery I 2021 A multiscale optimisation method for bone growth scaffolds based on triply periodic minimal surfaces Biomech. Model. Mechanobiol. 202085-96 |
| UIIah I, Cao L, Cui W, Xu Q, Yang R, Tang K L and Zhang X 2021 Stereolithography printing of bone scaffolds using biofunctional calcium phosphate nanoparticles J. Mater. Sci. Technol. 8899-108 |
| Zhu L Y, Li L, Li Z A, Shi J P, Tang W L, Yang J Q and Jiang Q 2019 Design and biomechanical characteristics of porous meniscal implant structures using triply periodic minimal surfaces J. Transl. Med. 171-10 |
| Corona-Castuera J, Rodriguez-Delgado D, Henao J, Castro-Sandoval J C and Poblano-Salas C A 2021 Design and fabrication of a customized partial hip prosthesis employing CT-scan data and lattice porous structures ACS Omega 66902-13 |
| Hsieh M T, Begley M R and Valdevit L 2021 Architected implant designs for long bones:advantages of minimal surface-based topologies Mater. Des. 207109838 |
| Mahmoud D, Al-Rubaie K S and Elbestawi M A 2021 The influence of selective laser melting defects on the fatigue properties of Ti6Al4V porosity graded gyroids for bone implants Int. J. Mech. Sci. 193106180 |
| Davoodi E et al 2021 Additively manufactured gradient porous Ti-6Al-4V hip replacement implants embedded with cell-laden gelatin methacryloyl hydrogels ACS Appl. Mater. Interfaces 1322110-23 |
| Qureshi Z A, Elnajjar E, Al-Ketan O, Al-Rub R A and Al-Omari S B 2021 Heat transfer performance of a finned metal foam-phase change material (FMF-PCM) system incorporating triply periodic minimal surfaces (TPMS) Int. J. Heat Mass. Transf. 170121001 |
| Kaur I and Singh P 2021 Flow and thermal transport characteristics of triply-periodic minimal surface (TPMS)-based gyroid and Schwarz-P cellular materials Numer. Heat Transf. A 79553-69 |
| Al-Ketan O, Ali M, Khalil M, Rowshan R, Khan K A and Abu Al-Rub R K 2021 Forced convection computational fluid dynamics analysis of architected and three-dimensional printable heat sinks based on triply periodic minimal surfaces J. Therm. Sci. Eng. Appl. 131-14 |
| Lei H Y, Li J R, Wang Q H, Xu Z J, Zhou W, Yu C L and Zheng T Q 2019 Feasibility of preparing additive manufactured porous stainless steel felts with mathematical micro pore structure as novel catalyst support for hydrogen production via methanol steam reforming Int. J. Hydrog. Energy 4424782-91 |
| Baena-Moreno F M, González-Castaño M, Navarro de Miguel J C, Miah K U M, Ossenbrink R, Odriozola J A and Arellano-García H 2021 Stepping toward efficient microreactors for CO2 methanation:3D-printed gyroid geometry ACS Sustain. Chem. Eng. 98198-206 |
| Femmer T, Kuehne A J C and Wessling M 2015 Estimation of the structure dependent performance of 3D rapid prototyped membranes Chem. Eng. J. 273438-45 |
| Hesselmann F, Scherenberg N, Bongartz P, Djeljadini S, Wessling M, Cornelissen C, Schmitz-Rode T, Steinseifer U, Jansen S V and Arens J 2021 Structure-dependent gas transfer performance of 3D-membranes for artificial membrane lungs J. Memb. Sci. 634119371 |
| Hur K, Hennig R G and Wiesner U 2017 Exploring periodic bicontinuous cubic network structures with complete phononic bandgaps J. Phys. Chem. C 12122347-52 |
| Yang W, An J, Chua C K and Zhou K 2020 Acoustic absorptions of multifunctional polymeric cellular structures based on triply periodic minimal surfaces fabricated by stereolithography Virtual Phys. Prototyp. 15242-9 |
| Feng Y, Guo X, Huang K, Elsayed H, Franchin G, Gong H and Colombo P 2021 Enhanced electromagnetic microwave absorption of SiOC ceramics targeting the integration of structure and function J. Eur. Ceram. Soc. 416393-405 |
| Pouya C, Overvelde J T B, Kolle M, Aizenberg J, Bertoldi K, Weaver J C and Vukusic P 2016 Characterization of a mechanically tunable gyroid photonic crystal inspired by the butterfly Parides sesostris Adv. Opt. Mater. 499-105 |
| Strömberg N 2020 Optimal grading of TPMS-based lattice structures with transversely isotropic elastic bulk properties Eng. Optim. 531871-83 |
| Hu J, Wang S, Li B, Li F, Luo Z and Liu L 2020 Efficient representation and optimization for TPMS-based porous structures IEEE Trans. Vis. Comput. Graph. (https://doi.org/10.1109/TVCG.2020.3037697) |
| Li W, Yu G and Yu Z 2020 Bioinspired heat exchangers based on triply periodic minimal surfaces for supercritical CO2 cycles Appl. Therm. Eng. 179115686 |
| Attarzadeh R, Rovira M and Duwig C 2021 Design analysis of the'Schwartz D' based heat exchanger:a numerical study Int. J. Heat Mass. Transf. 177121415 |
| Kobayashi T, Li Y X, Ono A, Zeng X B and Ichikawa T 2019 Gyroid structured aqua-sheets with sub-nanometer thickness enabling 3D fast proton relay conduction Chem. Sci. 106245-53 |
| Tan S, Gu J, Han S C, Lee D W and Kang K 2018 Design and fabrication of a non-clogging scaffold composed of semi-permeable membrane Mater. Des. 142229-39 |
| Han S C and Kang K 2019 Another stretching-dominated micro-architectured material, shellular Mater. Today 3131-38 |
| Werner J G, Rodríguez-Calero G G, Abruña H D and Wiesner U 2018 Block copolymer derived 3D interpenetrating multifunctional gyroidal nanohybrids for electrical energy storage Energy Environ. Sci. 111261-70 |
| Barba D, Alabort E and Reed R C 2019 Synthetic bone:design by additive manufacturing Acta Biomater. 97637-56 |
| Charbonnier B et al 2020 Custom-made macroporous bioceramic implants based on triply-periodic minimal surfaces for bone defects in load-bearing sites Acta Biomater. 109254-66 |
| Al-Ketan O and Abu Al-Rub R K 2019 Multifunctional mechanical metamaterials based on triply periodic minimal surface lattices Adv. Eng. Mater. 211-39 |
| Gan Z, Turner M D and Gu M 2016 Biomimetic gyroid nanostructures exceeding their natural origins Sci. Adv. 2 e160008 |
| Han L and Che S 2018 An overview of materials with triply reriodic minimal surfaces and related geometry:from biological structures to self-assembled systems Adv. Mater. 301705708 |
| Yoo D J 2011 Computer-aided porous scaffold design for tissue engineering using triply periodic minimal surfaces Int. J. Precis. Eng. Manuf. 1261-71 |
| Lorensen W E and Cline H E 1987 Marching cubes:a high resolution 3D surface construction algorithm Comput. Graph. (ACM). 21163-9 |
| Liu F, Mao Z, Zhang P, Zhang D Z, Jiang J and Ma Z 2018 Functionally graded porous scaffolds in multiple patterns:new design method, physical and mechanical properties Mater. Des. 160849-60 |
| Wang S, Shi Z, Liu L, Zhou X, Zhu L and Hao Y 2020 The design of Ti6Al4V primitive surface structure with symmetrical gradient of pore size in biomimetic bone scaffold Mater. Des. 193108830 |
| Yang N, Song Y, Huang J, Chen Y and Maskery I 2021 Combinational design of heterogeneous lattices with hybrid region stiffness tuning for additive manufacturing Mater. Des. 209109955 |
| Maskery I, Aremu A O, Parry L, Wildman R D, Tuck C J and Ashcroft I A 2018 Effective design and simulation of surface-based lattice structures featuring volume fraction and cell type grading Mater. Des. 155220-32 |
| Yoo D J and Kim K H 2015 An advanced multi-morphology porous scaffold design method using volumetric distance field and beta growth function Int. J. Precis. Eng. Manuf. 162021-32 |
| Vijayavenkataraman S, Zhang L, Zhang S, Hsi Fuh J Y and Lu W F 2018 Triply periodic minimal surfaces sheet scaffolds for tissue engineering applications:an optimization approach toward biomimetic scaffold design ACS Appl. Bio Mater. 1259-69 |
| Walker J M, Bodamer E, Kleinfehn A, Luo Y, Becker M and Dean D 2017 Design and mechanical characterization of solid and highly porous 3D printed poly(propylene fumarate) scaffolds Prog. Addit. Manuf. 299-108 |
| Callens S J P, Arns C H, Kuliesh A and Zadpoor A A 2021 Decoupling minimal surface metamaterial properties through multi-material hyperbolic tilings Adv. Funct. Mater. 312101373 |
| Al-Ketan O, Soliman A, AlQubaisi A M and Abu Al-Rub R K 2018 Nature-inspired lightweight cellular co-continuous composites with architected periodic gyroidal structures Adv. Eng. Mater. 201700549 |
| Feng J, Liu B, Lin Z and Fu J 2021 Isotropic porous structure design methods based on triply periodic minimal surfaces Mater. Des. 210110050 |
| Deng B and Cheng G J 2021 Soap film inspired mechanical metamaterials approaching theoretical bound of stiffness across full density range Mater. Horiz. 8987-96 |
| Chen Z, Xie Y M, Wu X, Wang Z, Li Q and Zhou S 2019 On hybrid cellular materials based on triply periodic minimal surfaces with extreme mechanical properties Mater. Des. 183108109 |
| Fan X, Tang Q, Feng Q, Ma S, Song J, Jin M, Guo F and Jin P 2021 Design, mechanical properties and energy absorption capability of graded-thickness triply periodic minimal surface structures fabricated by selective laser melting Int. J. Mech. Sci. 204106586 |
| Afshar M, Pourkamali Anaraki A and Montazerian H 2018 Compressive characteristics of radially graded porosity scaffolds architectured with minimal surfaces Mater. Sci. Eng. C 92254-67 |
| Wang Z, Wang X, Gao T and Shi C 2021 Mechanical behavior and deformation mechanism of triply periodic minimal surface sheet under compressive loading Mech. Adv. Mater. Struct. 282057-69 |
| Abueidda D W, Elhebeary M, Shiang C S (Andrew), Abu Al-Rub R K and Jasiuk I M 2020 Compression and buckling of microarchitectured Neovius-lattice Extrem. Mech. Lett. 37100688 |
| Yang L, Yan C, Cao W, Liu Z, Song B, Wen S, Zhang C, Shi Y and Yang S 2019 Compression-compression fatigue behaviour of gyroid-type triply periodic minimal surface porous structures fabricated by selective laser melting Acta Mater. 18149-66 |
| Keshavarzan M, Kadkhodaei M, Badrossamay M and Karamooz Ravari M R 2020 Investigation on the failure mechanism of triply periodic minimal surface cellular structures fabricated by vat photopolymerization additive manufacturing under compressive loadings Mech. Mater. 140103150 |
| Plocher J and Panesar A 2020 Effect of density and unit cell size grading on the stiffness and energy absorption of short fibre-reinforced functionally graded lattice structures Addit. Manuf. 33101171 |
| Zhao M, Zhang D Z, Liu F, Li Z, Ma Z and Ren Z 2020 Mechanical and energy absorption characteristics of additively manufactured functionally graded sheet lattice structures with minimal surfaces Int. J. Mech. Sci. 167105262 |
| Abueidda D W, Elhebeary M, Shiang C S (Andrew), Pang S, Abu Al-Rub R K and Jasiuk I M 2019 Mechanical properties of 3D printed polymeric gyroid cellular structures:experimental and finite element study Mater. Des. 165107597 |
| Zhou H, Zhao M, Ma Z, Zhang D Z and Fu G 2020 Sheet and network based functionally graded lattice structures manufactured by selective laser melting:design, mechanical properties, and simulation Int. J. Mech. Sci. 175105480 |
| Lu J, Dong P, Zhao Y, Zhao Y and Zeng Y 20213D printing of TPMS structural ZnO ceramics with good mechanical properties Ceram. Int. 4712897-905 |
| Yang L, Han C, Wu H, Hao L, Wei Q, Yan C and Shi Y 2020 Insights into unit cell size effect on mechanical responses and energy absorption capability of titanium graded porous structures manufactured by laser powder bed fusion J. Mech. Behav. Biomed. Mater. 109103843 |
| Yu S, Sun J and Bai J 2019 Investigation of functionally graded TPMS structures fabricated by additive manufacturing Mater. Des. 182108021 |
| Al-Ketan O, Rezgui R, Rowshan R, Du H, Fang N X and Abu Al-Rub R K 2018 Microarchitected stretching-dominated mechanical metamaterials with minimal surface topologies Adv. Eng. Mater. 201800029 |
| Abueidda D W, Abu Al-Rub R K, Dalaq A S, Younes H A, Al Ghaferi A A and Shah T K 2015 Electrical conductivity of 3D periodic architectured interpenetrating phase composites with carbon nanostructured-epoxy reinforcements Compos. Sci. Technol. 118127-34 |
| Abueidda D W, Dalaq A S, Abu Al-Rub R K and Jasiuk I 2015 Micromechanical finite element predictions of a reduced coefficient of thermal expansion for 3D periodic architectured interpenetrating phase composites Compos. Struct. 13385-97 |
| Abueidda D W, Dalaq A S, Abu Al-Rub R K and Younes H A 2015 Finite element predictions of effective multifunctional properties of interpenetrating phase composites with novel triply periodic solid shell architectured reinforcements Int. J. Mech. Sci. 9280-89 |
| Dalaq A S, Abueidda D W and Abu Al-Rub R K 2016 Mechanical properties of 3D printed interpenetrating phase composites with novel architectured 3D solid-sheet reinforcements Composites A 84266-80 |
| Al-Ketan O, Adel Assad M and Abu Al-Rub R K 2017 Mechanical properties of periodic interpenetrating phase composites with novel architected microstructures Compos. Struct. 1769-19 |
| Al-Ketan O, Al-Rub R K A and Rowshan R 2017 Mechanical properties of a new type of architected interpenetrating phase composite materials Adv. Mater. Technol. 21600235 |
| Zhang L, Feih S, Daynes S, Chang S, Wang M Y, Wei J and Lu W F 2020 Pseudo-ductile fracture of 3D printed alumina triply periodic minimal surface structures J. Eur. Ceram. Soc. 40408-16 |
| Conway K M, Kunka C, White B C, Pataky G J and Boyce B L 2021 Increasing fracture toughness via architected porosity Mater. Des. 205109696 |
| Khan K A and Abu Al-Rub R K 2017 Time dependent response of architectured Neovius foams Int. J. Mech. Sci. 126106-19 |
| Cao X, Zhang D, Liao B, Fang S, Liu L, Gao R and Li Y 2020 Numerical analysis of the mechanical behavior and energy absorption of a novel P-lattice Thin-Walled Struct. 157107147 |
| Maskery I and Ashcroft I A 2020 The deformation and elastic anisotropy of a new gyroid-based honeycomb made by laser sintering Addit. Manuf. 36101548 |
| Wang F, Jiang H, Chen Y and Li X 2021 Predicting thermal and mechanical performance of stochastic and architected foams Int. J. Heat Mass. Transf. 171121139 |
| Hassan Ali M I, Al-Ketan O, Baobaid N, Khan K and Abu Al-Rub R K 2019 A study on the fluid flow and heat transfer for a porous architected heat sink using the idea of CFD modelling ASME Int. Mech. Eng. Congr. Expo. Proc. 81-6 |
| Mirabolghasemi A, Akbarzadeh A H, Rodrigue D and Therriault D 2019 Thermal conductivity of architected cellular metamaterials Acta Mater. 17461-80 |
| Catchpole-Smith S, Sélo R R J, Davis A W, Ashcroft I A, Tuck C J and Clare A 2019 Thermal conductivity of TPMS lattice structures manufactured via laser powder bed fusion Addit. Manuf. 30100846 |
| Vignoles G L, Rochais D and Chupin S 2021 Computation of the conducto-radiative effective heat conductivity of porous media defined by triply periodic minimal surfaces Int. J. Therm. Sci. 159106598 |
| Yadroitsev I, Shishkovsky I, Bertrand P and Smurov I 2009 Manufacturing of fine-structured 3D porous filter elements by selective laser melting Appl. Surf. Sci. 2555523-7 |
| Wu G, More K L, Johnston C M and Zelenay P 2011 High-performance electrocatalysts for oxygen reduction derived from polyaniline, iron, and cobalt Science 332443-7 |
| Dias M R, Fernandes P R, Guedes J M and Hollister S J 2012 Permeability analysis of scaffolds for bone tissue engineering J. Biomech. 45938-44 |
| Montazerian H, Zhianmanesh M, Davoodi E, Milani A S and Hoorfar M 2017 Longitudinal and radial permeability analysis of additively manufactured porous scaffolds:effect of pore shape and porosity Mater. Des. 122146-56 |
| Zhianmanesh M, Varmazyar M and Montazerian H 2019 Fluid permeability of graded porosity scaffolds architectured with minimal surfaces ACS Biomater. Sci. Eng. 51228-37 |
.6114d602-7981-4bc9-bc48-4b2502f2e212.png)
DownLoad: