| Gibson I, Rosen D, Stucker B and Khorasani M 2021 Vat photopolymerization Additive Manufacturing Technologies 3rd edn (Springer) 77-124 |
| Jadhav A and Jadhav V S 2022 A review on 3D printing: an additive manufacturing technology Mater. Today Proc. 622094-9 |
| Ge Q, Li Z Q, Wang Z L, Kowsari K, Zhang W, He X N, Zhou J L and Fang N X 2020 Projection micro stereolithography based 3D printing and its applications Int. J. Extrem. Manuf. 2022004 |
| O’Halloran S, Pandit A, Heise A and Kellett A 2023 Two-photon polymerization: fundamentals, materials, and chemical modification strategies Adv. Sci. 102204072 |
| Harinarayana V and Shin Y C 2021 Two-photon lithography for three-dimensional fabrication in micro/nanoscale regime: a comprehensive review Opt. Laser Technol. 142107180 |
| Dutta S D, Ganguly K, Patel D K, Patil T V, Luthfikasari R and Lim K T 2022 Printable nanorobots and microswimmers for therapeutic advancement: present status and future opportunities Nanorobotics and Nanodiagnostics in Integrative Biology and Biomedicine ed K T Lim and K A Abd-Elsalam (Springer) pp 53-78 |
| Rad Z F, Prewett P D and Davies G J 2021 High-resolution two-photon polymerization: the most versatile technique for the fabrication of microneedle arrays Microsyst. Nanoeng. 771 |
| Li J H and Pumera M 20213D printing of functional microrobots Chem. Soc. Rev. 502794-838 |
| Weiß T, Hildebrand G, Schade R and Liefeith K 2009 Two-photon polymerization for microfabrication of three-dimensional scaffolds for tissue engineering application Eng. Life Sci. 9384-90 |
| Lin Y and Xu J 2018 Microstructures fabricated by two-photon polymerization and their remote manipulation techniques: toward 3D printing of micromachines Adv. Opt. Mater. 61701359 |
| Mayer F, Richter S, Westhauser J, Blasco E, Barner-Kowollik C and Wegener M 2019 Multimaterial 3D laser microprinting using an integrated microfluidic system Sci. Adv. 5 eaau9160 |
| Sun X 2020 Cell motility and nanolithography Three-Dimensional Microfabrication Using Two-Photon Polymerization 2nd edn, ed T Baldacchini et al (William Andrew Publishing) ch 12.4, pp 527-40 |
| Ovsianikov A and Chichkov B N 2012 Three-dimensional microfabrication by two-photon polymerization technique Computer-Aided Tissue Engineering ed M A K Liebschner (Humana Press) pp 311-25 |
| Momeni F, Hassani N S M M, Liu X and Ni J 2017 A review of 4D printing Mater. Des. 12242-79 |
| Ge Q, Qi H J and Dunn M L 2013 Active materials by four-dimension printing Appl. Phys. Lett. 103131901 |
| Ge Q, Dunn C K, Qi H J and Dunn M L 2014 Active origami by 4D printing Smart Mater. Struct. 23094007 |
| Ge Q, Sakhaei A H, Lee H, Dunn C K, Fang N X and Dunn M L 2016 Multimaterial 4D printing with tailorable shape memory polymers Sci. Rep. 631110 |
| Yuan C, Wang F F and Ge Q 2021 Multimaterial direct 4D printing of high stiffness structures with large bending curvature Extreme Mech. Lett. 42101122 |
| Yang H, Leow W R, Wang T, Wang J, Yu J C, He K, Qi D P, Wan C J and Chen X D 20173D printed photoresponsive devices based on shape memory composites Adv. Mater. 291701627 |
| Bai Y K, Zhang J W and Chen X 2018 A thermal-, water-, and near-infrared light-induced shape memory composite based on polyvinyl alcohol and polyaniline fibers ACS Appl. Mater. Interfaces 1014017-25 |
| Shanthamma S, Preethi R, Moses J A and Anandharamakrishnan C 20214D printing of sago starch with turmeric blends: a study on pH-triggered spontaneous color transformation ACS Food Sci. Technol. 1669-79 |
| Chen H M, Li Y, Liu Y, Gong T, Wang L and Zhou S B 2014 Highly pH-sensitive polyurethane exhibiting shape memory and drug release Polym. Chem. 55168-74 |
| Gladman A S, Matsumoto E A, Nuzzo R G, Mahadevan L and Lewis J A 2016 Biomimetic 4D printing Nat. Mater. 15413-8 |
| Raviv D et al 2014 Active printed materials for complex self-evolving deformations Sci. Rep. 47422 |
| Kim Y, Yuk H, Zhao R K, Chester S A and Zhao X H 2018 Printing ferromagnetic domains for untethered fast-transforming soft materials Nature 558274-9 |
| Dong Y, Wang L, Xia N, Yang Z X, Zhang C, Pan C F, Jin D D, Zhang J C, Majidi C and Zhang L 2022 Untethered small-scale magnetic soft robot with programmable magnetization and integrated multifunctional modules Sci. Adv. 8 eabn8932 |
| Yousuf M H, Abuzaid W and Alkhader M 20204D printed auxetic structures with tunable mechanical properties Addit. Manuf. 35101364 |
| Wang Z J, Wang Z J, Zheng Y, He Q G, Wang Y and Cai S Q 2020 Three-dimensional printing of functionally graded liquid crystal elastomer Sci. Adv. 6 eabc0034 |
| Qu J Y, Kadic M, Naber A and Wegener M 2017 Micro-structured two-component 3D metamaterials with negative thermal-expansion coefficient from positive constituents Sci. Rep. 740643 |
| Hann S Y, Cui H T, Nowicki M and Zhang L G 20204D printing soft robotics for biomedical applications Addit. Manuf. 36101567 |
| Ge Q et al 20213D printing of highly stretchable hydrogel with diverse UV curable polymers Sci. Adv. 7 eaba4261 |
| He X et al 2023 Multimaterial three-dimensional printing of ultraviolet-curable ionic conductive elastomers with diverse polymers for multifunctional flexible electronics ACS Appl. Mater. Interfaces 153455-66 |
| He X N, Cheng J X, Li Z Q, Ye H T, Sun Z C, Liu Q J, Li H G, Wang R and Ge J 2023 Stretchable ultraviolet curable ionic conductive elastomers for digital light processing based 3D printing Adv. Mater. Technol. 82202088 |
| Rajabasadi F, Schwarz L, Medina-Sánchez M and Schmidt O G 20213D and 4D lithography of untethered microrobots Prog. Mater. Sci. 120100808 |
| Zhang B et al 2021 Mechanically robust and UV-curable shape-memory polymers for digital light processing based 4D printing Adv. Mater. 332101298 |
| Adam G, Benouhiba A, Rabenorosoa K, Clévy C and Cappelleri D J 20214D printing: enabling technology for microrobotics applications Adv. Intell. Syst. 32000216 |
| Ouyang W Q, Xu X Y, Lu W P, Zhao N, Han F and Chen S-C 2023 Ultrafast 3D nanofabrication via digital holography Nat. Commun. 141716 |
| Geng Q, Wang D E, Chen P F and Chen S-C 2019 Ultrafast multi-focus 3D nano-fabrication based on two-photon polymerization Nat. Commun. 102179 |
| Tottori S, Zhang L, Qiu F M, Krawczyk K K, Franco-Obregón A and Nelson B J 2012 Magnetic helical micromachines: fabrication, controlled swimming, and cargo transport Adv. Mater. 24811-6 |
| Huang T-Y, Sakar M S, Mao A, Petruska A J, Qiu F M, Chen X-B, Kennedy S, Mooney D and Nelson B J 20153D printed microtransporters: compound micromachines for spatiotemporally controlled delivery of therapeutic agents Adv. Mater. 276644-50 |
| Watanabe T, Akiyama M, Totani K, Kuebler S M, Stellacci F, Wenseleers W, Braun K, Marder S R and Perry J W 2002 Photoresponsive hydrogel microstructure fabricated by two-photon initiated polymerization Adv. Funct. Mater. 12611-4 |
| Kaehr B and Shear J B 2008 Multiphoton fabrication of chemically responsive protein hydrogels for microactuation Proc. Natl Acad. Sci. USA 1058850-4 |
| McCracken J M et al 2019 Microstructured photopolymerization of liquid crystalline elastomers in oxygen-rich environments Adv. Funct. Mater. 291903761 |
| Carlotti M, Tricinci O, den Hoed F, Palagi S and Mattoli V 2021 Direct laser writing of liquid crystal elastomers oriented by a horizontal electric field Open Res. Eur. 1129 |
| Guo Y B, Shahsavan H and Sitti M 2020 Microscale polarization color pixels from liquid crystal elastomers Adv. Opt. Mater. 81902098 |
| Lay C L, Koh C S L, Lee Y H, Phan-Quang G C, Sim H Y F, Leong S X, Han X M, Phang I Y and Ling X Y 2020 Two-photon-assisted polymerization and reduction: emerging formulations and applications ACS Appl. Mater. Interfaces 1210061-79 |
| Nguyen A K and Narayan R J 2017 Two-photon polymerization for biological applications Mater. Today 20314-22 |
| Naniz M A, Askari M, Zolfagharian A, Naniz M A and Bodaghi M 20224D printing: a cutting-edge platform for biomedical applications Biomed. Mater. 17062001 |
| Willemen N G A, Morsink M A J, Veerman D, da Silva C F, Cardoso J C, Souto E B and Severino P 2022 From oral formulations to drug-eluting implants: using 3D and 4D printing to develop drug delivery systems and personalized medicine Bio-Des. Manuf. 585-106 |
| Del Pozo M, Delaney C, da Cunha M P, Debije M G, Florea L and Schenning A P H J 2022 Temperature-responsive 4D liquid crystal microactuators fabricated by direct laser writing by two-photon polymerization Small Struct. 32100158 |
| Zhang W et al 2021 Structural multi-colour invisible inks with submicron 4D printing of shape memory polymers Nat. Commun. 12112 |
| Yasa I C, Ceylan H, Bozuyuk U, Wild A-M and Sitti M 2020 Elucidating the interaction dynamics between microswimmer body and immune system for medical microrobots Sci. Robot. 5 eaaz3867 |
| Cabanach P, Pena-francesch A, Sheehan D, Bozuyuk U, Yasa O, Borros S and Sitti M 2020 Zwitterionic 3D-printed non-immunogenic stealth microrobots Adv. Mater. 322003013 |
| Zeng H, Wasylczyk P, Parmeggiani C, Martella D, Burresi M and Wiersma D S 2015 Light-fueled microscopic walkers Adv. Mater. 273883-7 |
| Spiegel C A, Hippler M, Münchinger A, Bastmeyer M, Barner-kowollik C, Wegener M and Blasco E 20204D printing at the microscale Adv. Funct. Mater. 301907615 |
| Wang H et al 2023 Two-photon polymerization lithography for optics and photonics: fundamentals, materials, technologies, and applications Adv. Funct. Mater. 332214211 |
| Ovsianikov A et al 2008 Ultra-low shrinkage hybrid photosensitive material for two-photon polymerization microfabrication ACS Nano 22257-62 |
| Spiegel C A, Hackner M, Bothe V P, Spatz J P and Blasco E 20224D printing of shape memory polymers: from macro to micro Adv. Funct. Mater. 322110580 |
| Göppert-Mayer M 1931 Uber elementarakte mit zwei quantensprüngen Ann. Phys. 401273-94 |
| Kaiser W and Garrett C G B 1961 Two-photon excitation in CaF2: Eu2+ Phys. Rev. Lett. 7229-31 |
| Denk W, Strickler J H and Webb W W 1990 Two-photon laser scanning fluorescence microscopy Science 24873-76 |
| Maruo S, Nakamura O and Kawata S 1997 Three-dimensional microfabrication with two-photon-absorbed photopolymerization Opt. Lett. 22132-4 |
| Samsonas D et al 20233D nanopolymerization and damage threshold dependence on laser wavelength and pulse duration Nanophotonics 121537-48 |
| Butkus A, Skliutas E, Gailevičius D and Malinauskas M 2022 Femtosecond-laser direct writing 3D micro/nano-lithography using VIS-light oscillator J. Cent. South Univ. 293270-6 |
| Fourkas J T 2020 Fundamentals of two-photon fabrication Three-Dimensional Microfabrication Using Two-Photon Polymerization 2nd edn, ed T Baldacchini (William Andrew Publishing) ch 1.3, pp 57-76 |
| Kawata S, Sun H-B, Tanaka T and Takada K 2001 Finer features for functional microdevices Nature 412697-8 |
| Desbiolles B X E, Bertsch A and Renaud P 2019 Ion beam etching redeposition for 3D multimaterial nanostructure manufacturing Microsyst. Nanoeng. 511 |
| Somers P, Liang Z H, Johnson J E, Boudouris B W, Pan L and Xu X F 2021 Rapid, continuous projection multi-photon 3D printing enabled by spatiotemporal focusing of femtosecond pulses Light Sci. Appl. 10199 |
| Hahn V, Messer T, Bojanowski N M, Curticean E R, Wacker I, Schröder R R, Blasco E and Wegener M 2021 Two-step absorption instead of two-photon absorption in 3D nanoprinting Nat. Photon. 15932-8 |
| Hahn V, Rietz P, Hermann F, Müller P, Barner-Kowollik C, Schlöder T, Wenzel W, Blasco E and Wegener M 2022 Light-sheet 3D microprinting via two-colour two-step absorption Nat. Photon. 16784-91 |
| Gissibl T, Thiele S, Herkommer A and Giessen H 2016 Two-photon direct laser writing of ultracompact multi-lens objectives Nat. Photon. 10554-60 |
| Rad Z F, Nordon R E, Anthony C J, Bilston L, Prewett P D, Arns J-Y, Arns C H, Zhang L C and Davies G J 2017 High-fidelity replication of thermoplastic microneedles with open microfluidic channels Microsyst. Nanoeng. 317034 |
| Sugioka K and Cheng Y 2014 Femtosecond laser three-dimensional micro-and nanofabrication Appl. Phys. Rev. 1041303 |
| Saha S K, Wang D E, Nguyen V H, Chang Y N, Oakdale J S and Chen S-C 2019 Scalable submicrometer additive manufacturing Science 366105-9 |
| Maibohm C, Silvestre O F, Borme J, Sinou M, Heggarty K and Nieder J B 2020 Multi-beam two-photon polymerization for fast large area 3D periodic structure fabrication for bioapplications Sci. Rep. 108740 |
| Yang L L, Wei J T, Ma Z, Song P S, Ma J, Zhao Y Q, Huang Z, Zhang M L, Yang F H and Wang X D 2019 The fabrication of micro/nano structures by laser machining Nanomaterials 91789 |
| Coelho S, Baek J, Walsh J, Justin Gooding J and Gaus K 2022 Direct-laser writing for subnanometer focusing and single-molecule imaging Nat. Commun. 13647 |
| Sedghamiz E, Liu M D and Wenzel W 2022 Challenges and limits of mechanical stability in 3D direct laser writing Nat. Commun. 132115 |
| Rad Z F, Prewett P D and Davies G J 2022 Parametric optimization of two-photon direct laser writing process for manufacturing polymeric microneedles Addit. Manuf. 56102953 |
| Balena A, Bianco M, Pisanello F and De Vittorio M 2023 Recent advances on high-speed and holographic two-photon direct laser writing Adv. Funct. Mater. 332211773 |
| Gonzalez-hernandez D, Sanchez-padilla B, Gailevičius D, Thodika S C, Juodkazis S, Brasselet E and Malinauskas M 2023 Single-step 3D printing of micro-optics with adjustable refractive index by ultrafast laser nanolithography Adv. Opt. Mater. 112300258 |
| Wloka T, Gottschaldt M and Schubert U S 2022 From light to structure: photo initiators for radical two-photon polymerization Chem. Eur. J. 28 e202104191 |
| Carlotti M and Mattoli V 2019 Functional materials for two-photon polymerization in microfabrication Small 151902687 |
| Tičkunas T, Perrenoud M, Butkus S, Gadonas R, Rekstytė S M, Malinauskas M, Paipulas D, Bellouard Y and Sirutkaitis V 2017 Combination of additive and subtractive laser 3D microprocessing in hybrid glass/polymer microsystems for chemical sensing applications Opt. Express 2526280-8 |
| Peters C, Ergeneman O, García P D W, Müller M, Pané S, Nelson B J and Hierold C 2014 Superparamagnetic twist-type actuators with shape-independent magnetic properties and surface functionalization for advanced biomedical applications Adv. Funct. Mater. 245269-76 |
| Wang X P et al 2019 MOFBOTS: metal-organic-framework-based biomedical microrobots Adv. Mater. 311901592 |
| Qiu F M, Zhang L, Peyer K E, Casarosa M, Franco-Obregón A, Choi H and Nelson B J 2014 Noncytotoxic artificial bacterial flagella fabricated from biocompatible ORMOCOMP and iron coating J. Mater. Chem. B 2357-62 |
| Schwarz L, Karnaushenko D D, Hebenstreit F, Naumann R, Schmidt O G and Medina-sánchez M 2020 A rotating spiral micromotor for noninvasive zygote transfer Adv. Sci. 72000843 |
| Yang L et al 2019 Targeted single-cell therapeutics with magnetic tubular micromotor by one-step exposure of structured femtosecond optical vortices Adv. Funct. Mater. 291905745 |
| Xin C et al 2019 Conical hollow microhelices with superior swimming capabilities for targeted cargo delivery Adv. Mater. 311808226 |
| Villangca M J, Palima D, Bañas A R and Glückstad J 2016 Light-driven micro-tool equipped with a syringe function Light Sci. Appl. 5 e16148 |
| Liu X J, Wei M X, Wang Q, Tian Y J, Han J M, Gu H C, Ding H B, Chen Q, Zhou K and Gu Z Z 2021 Capillary-force-driven self-assembly of 4D-printed microstructures Adv. Mater. 332100332 |
| Rekstytė S, Paipulas D, Malinauskas M and Mizeikis V 2017 Microactuation and sensing using reversible deformations of laser-written polymeric structures Nanotechnology 28124001 |
| Minnick G et al 2023 Two-photon polymerized shape memory microfibers: a new mechanical characterization method in liquid Adv. Funct. Mater. 332206739 |
| Zyla G, Kovalev A, Gurevich E L, Esen C, Liu Y, Lu Y F, Gorb S and Ostendorf A 2020 Structural colors with angle-insensitive optical properties generated by Morpho-inspired 2PP structures Appl. Phys. A 126740 |
| Elliott L V, Salzman E E and Greer J R 2021 Stimuli responsive shape memory microarchitectures Adv. Funct. Mater. 312008380 |
| Zhang W et al 2022 Stiff shape memory polymers for high-resolution reconfigurable nanophotonics Nano Lett. 228917-24 |
| Ceylan H, Yasa I C, Yasa O, Tabak A F, Giltinan J and Sitti M 20193D-printed biodegradable microswimmer for theranostic cargo delivery and release ACS Nano 133353-62 |
| Sun H C M, Liao P, Wei T Y, Zhang L and Sun D 2020 Magnetically powered biodegradable microswimmers Micromachines 11404 |
| Park J, Jin C, Lee S, Kim J-Y and Choi H 2019 Magnetically actuated degradable microrobots for actively controlled drug release and hyperthermia therapy Adv. Healthcare Mater. 81900213 |
| Wang X P, Qin X-H, Hu C Z, Terzopoulou A, Chen X-Z, Huang T-Y, Maniura-weber K, Pané S and Nelson B J 20183D printed enzymatically biodegradable soft helical microswimmers Adv. Funct. Mater. 281804107 |
| Bozuyuk U, Yasa O, Yasa I C, Ceylan H, Kizilel S and Sitti M 2018 Light-triggered drug release from 3D-printed magnetic chitosan microswimmers ACS Nano 129617-25 |
| Jin D D, Chen Q Y, Huang T-Y, Huang J Y, Zhang L and Duan H L 2020 Four-dimensional direct laser writing of reconfigurable compound micromachines Mater. Today 3219-25 |
| Huang T-Y, Huang H-W, Jin D D, Chen Q Y, Huang J Y, Zhang L and Duan H L 2020 Four-dimensional micro-building blocks Sci. Adv. 6 eaav8219 |
| Chen Q Y, Lv P Y, Huang T-Y, Huang J Y and Duan H L 2020 Encoding smart microjoints for microcrawlers with enhanced locomotion Adv. Intell. Syst. 21900128 |
| Ma Z-C, Zhang Y-L, Han B, Hu X-Y, Li C-H, Chen Q-D and Sun H-B 2020 Femtosecond laser programmed artificial musculoskeletal systems Nat. Commun. 114536 |
| Wang J-Y, Jin F, Dong X-Z, Liu J and Zheng M-L 2022 Flytrap inspired pH-driven 3D hydrogel actuator by femtosecond laser microfabrication Adv. Mater. Technol. 72200276 |
| Hu Y et al 2020 Botanical-inspired 4D printing of hydrogel at the microscale Adv. Funct. Mater. 301907377 |
| Wei S X, Liu J, Zhao Y Y, Zhang T B, Zheng M L, Jin F, Dong X Z, Xing J F and Duan X M 2017 Protein-based 3D microstructures with controllable morphology and pH-responsive properties ACS Appl. Mater. Interfaces 942247-57 |
| Li R et al 2020 Stimuli-responsive actuator fabricated by dynamic asymmetric femtosecond bessel beam for in situ particle and cell manipulation ACS Nano 145233-42 |
| Wang J G, Zhang Y Z, Zheng J C, Zhao X B, Guo H J, Qiu Y, Wang X D, Liu L Q and Yu H B 2023 A 4D-printing inverse design strategy for micromachines with customized shape-morphing Small 2302656 |
| Deng C S, Liu Y C, Fan X H, Jiao B Z, Zhang Z X, Zhang M D, Chen F Y, Gao H, Deng L M and Xiong W 2023 Femtosecond laser 4D printing of light-driven intelligent micromachines Adv. Funct. Mater. 332211473 |
| Hippler M, Blasco E, Qu J Y, Tanaka M, Barner-Kowollik C, Wegener M and Bastmeyer M 2019 Controlling the shape of 3D microstructures by temperature and light Nat. Commun. 10232 |
| Spratte T, Geiger S, Colombo F, Mishra A, Taale M, Hsu L-Y, Blasco E and Selhuber-unkel C 2023 Increasing the efficiency of thermoresponsive actuation at the microscale by direct laser writing of pNIPAM Adv. Mater. Technol. 82200714 |
| Liu Y C, Liu R C, Qiu J J and Wang S R 20224D printing of thermal responsive structure for environmentally adaptive radiative cooling and heating J. Adv. Manuf. Process. 4 e10107 |
| Tudor A, Delaney C, Zhang H R, Thompson A J, Curto V F, Yang G-Z, Higgins M J, Diamond D and Florea L 2018 Fabrication of soft, stimulus-responsive structures with sub-micron resolution via two-photon polymerization of poly(ionic liquid)s Mater. Today 21807-16 |
| Zhang Y-L, Tian Y, Wang H, Ma Z-C, Han D-D, Niu L-G, Chen Q-D and Sun H-B 2019 Dual-3D femtosecond laser nanofabrication enables dynamic actuation ACS Nano 134041-8 |
| Ennis A, Nicdao D, Kolagatla S, Dowling L, Tskhe Y, Thompson A J, Trimble D, Delaney C and Florea L 2023 Two-photon polymerization of sugar responsive 4D microstructures Adv. Funct. Mater. 332213947 |
| Lv C et al 2018 Humidity-responsive actuation of programmable hydrogel microstructures based on 3D printing Sens. Actuators B 259736-44 |
| Guo Y B, Zhang J C, Hu W Q, Khan M T A and Sitti M 2021 Shape-programmable liquid crystal elastomer structures with arbitrary three-dimensional director fields and geometries Nat. Commun. 125936 |
| Del Pozo M, Delaney C, Bastiaansen C W M, Diamond D, Schenning A P H J and Florea L 2020 Direct laser writing of four-dimensional structural color microactuators using a photonic photoresist ACS Nano 149832-9 |
| Martella D, Nocentini S, Nuzhdin D, Parmeggiani C and Wiersma D S 2017 Photonic microhand with autonomous action Adv. Mater. 291704047 |
| Münchinger A, Hsu L-Y, Fürniß F, Blasco E and Wegener M 20223D optomechanical metamaterials Mater. Today 599-17 |
| Chen L, Dong Y Q, Tang C-Y, Zhong L, Law W-C, Tsui G C P, Yang Y K and Xie X L 2019 Development of direct-laser-printable light-powered nanocomposites ACS Appl. Mater. Interfaces 1119541-53 |
| Hsu L-Y, Mainik P, Münchinger A, Lindenthal S, Spratte T, Welle A, Zaumseil J, Selhuber-unkel C, Wegener M and Blasco E 2023 A facile approach for 4D microprinting of multi-photoresponsive actuators Adv. Mater. Technol. 82200801 |
| Zhang C Q, Li X J, Jiang L M, Tang D F, Xu H, Zhao P, Fu J Z, Zhou Q F and Chen Y 20213D printing of functional magnetic materials: from design to applications Adv. Funct. Mater. 312102777 |
| Zhou H J, Mayorga-Martinez C C, Pané S, Zhang L and Pumera M 2021 Magnetically driven micro and nanorobots Chem. Rev. 1214999-5041 |
| Peyer K E, Tottori S, Qiu F M, Zhang L and Nelson B J 2013 Magnetic helical micromachines Chem. Eur. J. 1928-38 |
| Chen X-Z, Hoop M, Mushtaq F, Siringil E, Hu C Z, Nelson B J and Pané S 2017 Recent developments in magnetically driven micro- and nanorobots Appl. Mater. Today 937-48 |
| Liu D, Guo R R, Wang B, Hu J W and Lu Y 2022 Magnetic micro/nanorobots: a new age in biomedicines Adv. Intell. Syst. 42200208 |
| Khalid M Y, Arif Z U, Noroozi R, Zolfagharian A and Bodaghi M 20224D printing of shape memory polymer composites: a review on fabrication techniques, applications, and future perspectives J. Manuf. Process. 81759-97 |
| Champeau M, Heinze D A, Viana T N, De Souza E R, Chinellato A C and Titotto S 20204D printing of hydrogels: a review Adv. Funct. Mater. 301910606 |
| Dong Y T, Wang S C, Ke Y J, Ding L C, Zeng X T, Magdassi S and Long Y 20204D printed hydrogels: fabrication, materials, and applications Adv. Mater. Technol. 52000034 |
| Liu S J, Chen X L and Zhang Y L 2020 Hydrogels and hydrogel composites for 3D and 4D printing applications 3D and 4D Printing of Polymer Nanocomposite Materials ed K K Sadasivuni, K Deshmukh and M A Almaadeed (Elsevier) ch 14, pp 427-65 |
| Chen M, Gao M, Bai L C, Zheng H, Qi H J and Zhou K 2023 Recent advances in 4D printing of liquid crystal elastomers Adv. Mater. 352209566 |
| Del Pozo M, Sol J A H P, Schenning A P H J and Debije M G 20224D printing of liquid crystals: what’s right for me? Adv. Mater. 342104390 |
| Zeng H, Martella D, Wasylczyk P, Cerretti G, Lavocat J C G, Ho C H, Parmeggiani C and Wiersma D S 2014 High-resolution 3D direct laser writing for liquid-crystalline elastomer microstructures Adv. Mater. 262319-22 |
| Wang L C, Meng Z Y, Chen Y and Zheng Y Y 2021 Engineering magnetic micro/nanorobots for versatile biomedical applications Adv. Intell. Syst. 32000267 |
| Wang X Y, Wei Z P, Baysah C Z, Zheng M L and Xing J F 2019 Biomaterial-based microstructures fabricated by two-photon polymerization microfabrication technology RSC Adv. 934472-80 |
| Luo M, Feng Y Z, Wang T W and Guan J G 2018 Micro-/nanorobots at work in active drug delivery Adv. Funct. Mater. 281706100 |
| Sun Z L and Hou Y L 2022 Micro/nanorobots as active delivery systems for biomedicine: from self-propulsion to controllable navigation Adv. Ther. 52100228 |
| Soto F, Wang J, Ahmed R and Demirci U 2020 Medical micro/nanorobots in precision medicine Adv. Sci. 72002203 |
| Li J X, Avila B E F D, Gao W, Zhang L F and Wang J 2017 Micro/nanorobots for biomedicine: delivery, surgery, sensing, and detoxification Sci. Robot. 2 eaam6431 |
| Hu X H, Yasa I C, Ren Z Y, Goudu S R, Ceylan H, Hu W Q and Sitti M 2021 Magnetic soft micromachines made of linked microactuator networks Sci. Adv. 7 eabe8436 |
| Alapan Y, Yigit B, Beker O, Demirörs A F and Sitti M 2019 Shape-encoded dynamic assembly of mobile micromachines Nat. Mater. 181244-51 |
| Alcantara C C J, Landers F C, Kim S, De Marco C, Ahmed D, Nelson B J and Pané S 2020 Mechanically interlocked 3D multi-material micromachines Nat. Commun. 115957 |
| Zyla G, Kovalev A, Esen C, Ostendorf A and Gorb S 2022 Two-photon polymerization as a potential manufacturing tool for biomimetic engineering of complex structures found in nature J. Opt. Microsyst. 2031203 |
| Potyrailo R A, Ghiradella H, Vertiatchikh A, Dovidenko K, Cournoyer J R and Olson E 2007 Morpho butterfly wing scales demonstrate highly selective vapour response Nat. Photon. 1123-8 |
.c04ffef1-aa98-4cc3-9b6a-948b0bf492aa.png)
DownLoad: