Hou H L et al 2019 Fatigue-resistant high-performance elastocaloric materials made by additive manufacturing Science 3661116-21 |
Xue L, Atli K C, Picak S, Zhang C, Zhang B, Elwany A, Arroyave R and Karaman I 2021 Controlling martensitic transformation characteristics in defect-free NiTi shape memory alloys fabricated using laser powder bed fusion and a process optimization framework Acta Mater. 215117017 |
Parvizi S, Hashemi S M, Asgarinia F, Nematollahi M and Elahinia M 2021 Effective parameters on the final properties of NiTi-based alloys manufactured by powder metallurgy methods:a review Prog. Mater. Sci. 117100739 |
Saud S N, Hamzah E, Abubakar T and Bakhsheshi-Rad H R 2015 Microstructure and corrosion behaviour of Cu-Al-Ni shape memory alloys with Ag nanoparticles Mater. Corros. 66527-34 |
Xu J W 2008 Effects of Gd addition on microstructure and shape memory effect of Cu-Zn-Al alloy J. Alloys Compd. 448331-5 |
Hsu T Y 2000 Fe-Mn-Si based shape memory alloys Mater. Sci. Forum 327-328199-206 |
Sam J, Franco B, Ma J, Karaman I, Elwany A and Mabe J H 2018 Tensile actuation response of additively manufactured nickel-titanium shape memory alloys Scr. Mater. 146164-8 |
Elahinia M, Shayesteh Moghaddam N, Taheri Andani M, Amerinatanzi A, Bimber B A and Hamilton R F 2016 Fabrication of NiTi through additive manufacturing:a review Prog. Mater. Sci. 83630-63 |
Haberland C, Elahinia M, Walker J M, Meier H and Frenzel J 2014 On the development of high quality NiTi shape memory and pseudoelastic parts by additive manufacturing Smart Mater. Struct. 23104002 |
Seok S, Onal C D, Cho K J, Wood R J, Rus D and Kim S 2013 Meshworm:a peristaltic soft robot with antagonistic nickel titanium coil actuators IEEE/ASME Trans. Mechatronics 181485-97 |
Kim D-H, Lee M G, Kim B and Sun Y 2005 A superelastic alloy microgripper with embedded electromagnetic actuators and piezoelectric force sensors:a numerical and experimental study Smart Mater. Struct. 141265-72 |
Tan C L et al 2021 Additive manufacturing of bio-inspired multi-scale hierarchically strengthened lattice structures Int. J. Mach. Tools Manuf. 167103764 |
Bhagyaraj J, Ramaiah K V, Saikrishna C N, Bhaumik S K and Gouthama 2013 Behavior and effect of Ti2Ni phase during processing of NiTi shape memory alloy wire from cast ingot J. Alloys Compd. 581344-51 |
Luo J, Ye W J, Ma X X, Bobanga J O and Lewandowski J J 2018 The evolution and effects of second phase particles during hot extrusion and re-extrusion of a NiTi shape memory alloy J. Alloys Compd. 7351145-51 |
Jiang S Y and Zhang Y Q 2012 Microstructure evolution and deformation behavior of as-cast NiTi shape memory alloy under compression Trans. Nonferrous Met. Soc. China 2290-96 |
Li B Y, Rong L J, Li Y Y and Gjunter V E 2000 Synthesis of porous Ni-Ti shape-memory alloys by self-propagating high-temperature synthesis:reaction mechanism and anisotropy in pore structure Acta Mater. 483895-904 |
Biswas A 2005 Porous NiTi by thermal explosion mode of SHS:processing, mechanism and generation of single phase microstructure Acta Mater. 531415-25 |
Zhang Y P, Li D S and Zhang X P 2007 Gradient porosity and large pore size NiTi shape memory alloys Scr. Mater. 571020-3 |
Ataee A, Li Y C, Brandt M and Wen C E 2018 Ultrahigh-strength titanium gyroid scaffolds manufactured by selective laser melting (SLM) for bone implant applications Acta Mater. 158354-68 |
Wei H Q, Cauchy X, Navas I O, Abderrafai Y, Chizari K, Sundararaj U, Liu Y J, Leng J S and Therriault D 2019 Direct 3D printing of hybrid nanofiber-based nanocomposites for highly conductive and shape memory applications ACS Appl. Mater. Interfaces 1124523-32 |
Zhang B C, Chen J and Coddet C 2013 Microstructure and transformation behavior of in-situ shape memory alloys by selective laser melting Ti-Ni mixed powder J. Mater. Sci. Technol. 29863-7 |
Zhang J L, Song B, Yang L, Liu R J, Zhang L and Shi Y S 2020 Microstructure evolution and mechanical properties of TiB/Ti6Al4V gradient-material lattice structure fabricated by laser powder bed fusion Composites B 202108417 |
Zhang L, Song B, Yang L and Shi Y S 2020 Tailored mechanical response and mass transport characteristic of selective laser melted porous metallic biomaterials for bone scaffolds Acta Biomater. 112298-315 |
Zhang L, Song B, Choi S K and Shi Y S 2021 A topology strategy to reduce stress shielding of additively manufactured porous metallic biomaterials Int. J. Mech. Sci. 197106331 |
Zhang C, Zhu J K, Zheng H, Li H, Liu S and Cheng G J 2020 A review on microstructures and properties of high entropy alloys manufactured by selective laser melting Int. J. Extreme Manuf. 2032003 |
Wen S F, Gan J, Li F, Zhou Y, Yan C Z and Shi Y S 2021 Research status and prospect of additive manufactured nickel-titanium shape memory alloys Materials 144496 |
Wei S S, Song B, Zhang Y J, Zhang L and Shi Y S 2022 Mechanical response of triply periodic minimal surface structures manufactured by selective laser melting with composite materials Acta Metall. Sin. 35397-410 |
Chen W L, Yang Q, Huang S K, Huang S Y, Kruzic J J and Li X P 2021 Laser power modulated microstructure evolution, phase transformation and mechanical properties in NiTi fabricated by laser powder bed fusion J. Alloys Compd. 861157959 |
Wang X B, Kustov S and Van Humbeeck J 2018 A short review on the microstructure, transformation behavior and functional properties of NiTi shape memory alloys fabricated by selective laser melting Materials 111683 |
Sabahi N, Chen W L, Wang C H, Kruzic J J and Li X P 2020 A review on additive manufacturing of shape-memory materials for biomedical applications JOM 721229-53 |
Farber E, Zhu J N, Popovich A and Popovich V 2020 A review of NiTi shape memory alloy as a smart material produced by additive manufacturing Mater. Today Proc. 30761-7 |
Wang X B et al 2020 Effect of process parameters on the phase transformation behavior and tensile properties of NiTi shape memory alloys fabricated by selective laser melting Addit. Manuf. 36101545 |
Cao Y X et al 2020 Large tunable elastocaloric effect in additively manufactured Ni-Ti shape memory alloys Acta Mater. 194178-89 |
Guo W Q et al 2020 Study on the junction zone of NiTi shape memory alloy produced by selective laser melting via a stripe scanning strategy Intermetallics 126106947 |
Tan C L, Li S, Essa K, Jamshidi P, Zhou K S, Ma W Y and Attallah M M 2019 Laser powder bed fusion of Ti-rich TiNi lattice structures:process optimisation, geometrical integrity, and phase transformations Int. J. Mach. Tools Manuf. 14119-29 |
Mahmoudi M, Tapia G, Franco B, Ma J, Arroyave R, Karaman I and Elwany A 2018 On the printability and transformation behavior of nickel-titanium shape memory alloys fabricated using laser powder-bed fusion additive manufacturing J. Manuf. Process. 35672-80 |
Mehrpouya M, Gisario A, Rahimzadeh A, Nematollahi M, Baghbaderani K S and Elahinia M 2019 A prediction model for finding the optimal laser parameters in additive manufacturing of NiTi shape memory alloy Int. J. Adv. Manuf. Technol. 1054691-9 |
Bormann T, Müller B, Schinhammer M, Kessler A, Thalmann P and de Wild M 2014 Microstructure of selective laser melted nickel-titanium Mater. Charact. 94189-202 |
Saedi S, Shayesteh Moghaddam N, Amerinatanzi A, Elahinia M and Karaca H E 2018 On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi Acta Mater. 144552-60 |
Dabbaghi H, Safaei K, Nematollahi M, Bayati P and Elahinia M 2020 Additively manufactured NiTi and NiTiHf alloys:estimating service life in high-temperature oxidation Materials 132104 |
Gan J, Duan L C, Li F, Che Y S, Zhou Y, Wen S F and Yan C Z 2021 Effect of laser energy density on the evolution of Ni4Ti3 precipitate and property of NiTi shape memory alloys prepared by selective laser melting J. Alloys Compd. 869159338 |
Lu H Z, Ma H W, Cai W S, Luo X, Wang Z, Song C H, Yin S and Yang C 2021 Stable tensile recovery strain induced by a Ni4Ti3 nanoprecipitate in a Ni50.4Ti49.6 shape memory alloy fabricated via selective laser melting Acta Mater. 219117261 |
Chmielewska A, Wysocki B, Buhagiar J, Michalski B, Adamczyk-Ciéślak B, Gloc M and Swiȩszkowski W 2022 In situ alloying of NiTi:influence of laser powder bed fusion (LBPF) scanning strategy on chemical composition Mater. Today Commun. 30103007 |
Dadbakhsh S, Vrancken B, Kruth J P, Luyten J and Van Humbeeck J 2016 Texture and anisotropy in selective laser melting of NiTi alloy Mater. Sci. Eng. A 650225-32 |
Dadbakhsh S, Speirs M, Kruth J P, Schrooten J, Luyten J and Van Humbeeck J 2014 Effect of SLM parameters on transformation temperatures of shape memory nickel titanium parts Adv. Eng. Mater. 161140-6 |
Hamilton R F, Bimber B A and Palmer T A 2018 Correlating microstructure and superelasticity of directed energy deposition additive manufactured Ni-rich NiTi alloys J. Alloys Compd. 739712-22 |
Zhang Q Q, Hao S J, Liu Y T, Xiong Z W, Guo W Q, Yang Y, Ren Y, Cui L S, Ren L Q and Zhang Z H 2020 The microstructure of a selective laser melting (SLM)-fabricated NiTi shape memory alloy with superior tensile property and shape memory recoverability Appl. Mater. Today 19100547 |
Yu Z L, Xu Z Z, Guo Y T, Xin R L, Liu R Y, Jiang C R, Li L X, Zhang Z H and Ren L Q 2021 Study on properties of SLM-NiTi shape memory alloy under the same energy density J. Mater. Res. Technol. 13241-50 |
Yang Y, Zhan J B, Sun Z Z, Wang H L, Lin J X, Liu Y J and Zhang L C 2019 Evolution of functional properties realized by increasing laser scanning speed for the selective laser melting fabricated NiTi alloy J. Alloys Compd. 804220-9 |
Fu J, Hu Z H, Song X, Zhai W, Long Y, Li H and Fu M W 2020 Micro selective laser melting of NiTi shape memory alloy:defects, microstructures and thermal/mechanical properties Opt. Laser Technol. 131106374 |
Qin S, Zhan J B, Lu Y J and Lin J X 2022 Effect of energy input on the density and shape memory effect of NiTi alloy by selective laser melting in different hatch spacing Mater. Technol. 371263-75 |
Lu H Z, Yang C, Luo X, Ma H W, Song B, Li Y Y and Zhang L C 2019 Ultrahigh-performance TiNi shape memory alloy by 4D printing Mater. Sci. Eng. A 763138166 |
Yu Y Z et al 2021 Prediction of SLM-NiTi transition temperatures based on improved Levenberg-Marquardt algorithm J. Mater. Res. Technol. 153349-56 |
Wang C, Tan X P, Du Z, Chandra S, Sun Z, Lim C W J, Tor S B, Lim C S and Wong C H 2019 Additive manufacturing of NiTi shape memory alloys using pre-mixed powders J. Mater. Process. Technol. 271152-61 |
Zhao C Y, Liang H L, Luo S C, Yang J J and Wang Z M 2020 The effect of energy input on reaction, phase transition and shape memory effect of NiTi alloy by selective laser melting J. Alloys Compd. 817153288 |
Safaei K, Nematollahi M, Bayati P, Dabbaghi H, Benafan O and Elahinia M 2021 Torsional behavior and microstructure characterization of additively manufactured NiTi shape memory alloy tubes Eng. Struct. 226111383 |
Oliveira J P, Cavaleiro A J, Schell N, Stark A, Miranda R M, Ocana J L and Braz Fernandes F M 2018 Effects of laser processing on the transformation characteristics of NiTi:a contribute to additive manufacturing Scr. Mater. 152122-6 |
Zhou N, Shen C, Wagner M F X, Eggeler G, Mills M J and Wang Y 2010 Effect of Ni4Ti3 precipitation on martensitic transformation in Ti-Ni Acta Mater. 586685-94 |
Gu D D and Ma C L 2018 In-situ formation of Ni4Ti3 precipitate and its effect on pseudoelasticity in selective laser melting additive manufactured NiTi-based composites Appl. Surf. Sci. 441862-70 |
Ma C L, Gu D D, Dai D H, Xia M J and Chen H Y 2018 Selective growth of Ni4Ti3 precipitate variants induced by complicated cyclic stress during laser additive manufacturing of NiTi-based composites Mater. Charact. 143191-6 |
Li Z, Xiao F, Chen H, Hou R H, Cai X R and Jin X J 2021 Atomic scale modeling of the coherent strain field surrounding Ni4Ti3 precipitate and its effects on thermally-induced martensitic transformation in a NiTi alloy Acta Mater. 211116883 |
Song B, Dong S J, Deng S H, Liao H L and Coddet C 2014 Microstructure and tensile properties of iron parts fabricated by selective laser melting Opt. Laser Technol. 56451-60 |
Wang M, Song B, Wei Q S, Zhang Y J and Shi Y S 2019 Effects of annealing on the microstructure and mechanical properties of selective laser melted AlSi7Mg alloy Mater. Sci. Eng. A 739463-72 |
Saedi S, Turabi A S, Andani M T, Haberland C, Elahinia M and Karaca H 2016 Thermomechanical characterization of Ni-rich NiTi fabricated by selective laser melting Smart Mater. Struct. 25035005 |
Saedi S, Turabi A S, Andani M T, Moghaddam N S, Elahinia M and Karaca H E 2017 Texture, aging, and superelasticity of selective laser melting fabricated Ni-rich NiTi alloys Mater. Sci. Eng. A 6861-10 |
Wang X B, Speirs M, Kustov S, Vrancken B, Li X P, Kruth J P and Van Humbeeck J 2018 Selective laser melting produced layer-structured NiTi shape memory alloys with high damping properties and Elinvar effect Scr. Mater. 146246-50 |
Nigito E, Diemer F, Husson S, Ou S F, Tsai M H and Rézaï-Aria F 2022 Microstructure of NiTi superelastic alloy manufactured by selective laser melting Mater. Lett. 324132665 |
Xiong Z W, Li Z H, Sun Z, Hao S J, Yang Y, Li M, Song C H, Qiu P and Cui L S 2019 Selective laser melting of NiTi alloy with superior tensile property and shape memory effect J. Mater. Sci. Technol. 352238-42 |
Safdel A and Elbestawi M A 2021 New insights on the laser powder bed fusion processing of a NiTi alloy and the role of dynamic restoration mechanisms J. Alloys Compd. 885160971 |
Shayesteh Moghaddam N, Saedi S, Amerinatanzi A, Hinojos A, Ramazani A, Kundin J, Mills M J, Karaca H and Elahinia M 2019 Achieving superelasticity in additively manufactured NiTi in compression without post-process heat treatment Sci. Rep. 941 |
Zhu J N, Borisov E, Liang X H, Huizenga R, Popovich A, Bliznuk V, Petrov R, Hermans M and Popovich V 2022 Controlling microstructure evolution and phase transformation behavior in additive manufacturing of nitinol shape memory alloys by tuning hatch distance J. Mater. Sci. 576066-84 |
Yang Y, Wu Z G, Shen B Y, Wu M Z, Yuan Z S, Wang C Y and Zhang L C 2021 Graded functionality obtained in NiTi shape memory alloy via a repetitive laser processing strategy J. Mater. Process. Technol. 296117177 |
Nematollahi M, Safaei K, Bayati P and Elahinia M 2021 Functionally graded NiTi shape memory alloy:selective laser melting fabrication and multi-scale characterization Mater. Lett. 292129648 |
Alagha A N, Hussain S and Zaki W 2021 Additive manufacturing of shape memory alloys:a review with emphasis on powder bed systems Mater. Des. 204109654 |
Mosallanejad M H, Niroumand B, Aversa A and Saboori A 2021 In-situ alloying in laser-based additive manufacturing processes:a critical review J. Alloys Compd. 872159567 |
Chang S H and Wu S K 2007 Internal friction of B2→B19' martensitic transformation of Ti50Ni50 shape memory alloy under isothermal conditions Mater. Sci. Eng. A 454-455379-83 |
Chang S H and Wu S K 2006 Inherent internal friction of B2→R and R→B19' martensitic transformations in equiatomic TiNi shape memory alloy Scr. Mater. 55311-4 |
Wen S F, Liu Y, Zhou Y, Zhao A G, Yan C Z and Shi Y S 2021 Effect of Ni content on the transformation behavior and mechanical property of NiTi shape memory alloys fabricated by laser powder bed fusion Opt. Laser Technol. 134106653 |
Ma J, Franco B, Tapia G, Karayagiz K, Johnson L, Liu J, Arroyave R, Karaman I and Elwany A 2017 Spatial control of functional response in 4D-printed active metallic structures Sci. Rep. 746707 |
Grossmann C, Frenzel J, Sampath V, Depka T and Eggeler G 2009 Elementary transformation and deformation processes and the cyclic stability of NiTi and NiTiCu shape memory spring actuators Metall. Mater. Trans. A 402530-44 |
Simon T, Kröger A, Somsen C, Dlouhy A and Eggeler G 2010 On the multiplication of dislocations during martensitic transformations in NiTi shape memory alloys Acta Mater. 581850-60 |
Jiang S Y, Yu J B, Zhang Y Q and Xing X D 2020 Mechanically-induced martensite transformation of NiTiFe shape memory alloy subjected to plane strain compression Trans. Nonferrous Met. Soc. China 301325-34 |
Khalil Allafi J, Ren X and Eggeler G 2002 The mechanism of multistage martensitic transformations in aged Ni-rich NiTi shape memory alloys Acta Mater. 50793-803 |
Michael A, Zhou Y N, Yavuz M and Khan M I 2019 Modelling the alloy element composition change in NiTi achieved through laser induced vaporization Mater. Chem. Phys. 23187-94 |
Duerig T, Pelton A and Stöckel D 1999 An overview of nitinol medical applications Mater. Sci. Eng. A 273-275149-60 |
Morgan N B 2004 Medical shape memory alloy applications-the market and its products Mat. Sci. Eng. A 37816-23 |
Wang F E, Buehler W J and Pickart S J 1965 Crystal structure and a unique "Martensitic" transition of TiNi J. Appl. Phys. 363232-9 |
Frenzel J, George E P, Dlouhy A, Somsen C, Wagner M F X and Eggeler G 2010 Influence of Ni on martensitic phase transformations in NiTi shape memory alloys Acta Mater. 583444-58 |
Ranaiefar M, Honarmandi P, Xue L, Zhang C, Elwany A, Karaman I, Schwalbach E J and Arroyave R 2022 A differential evaporation model to predict chemistry change of additively manufactured metals Mater. Des. 213110328 |
Speirs M, Wang X, Van Baelen S, Ahadi A, Dadbakhsh S, Kruth J P and Van Humbeeck J 2016 On the transformation behavior of NiTi shape-memory alloy produced by SLM Shape Mem. Superelasticity 2310-6 |
Louvis E, Fox P and Sutcliffe C J 2011 Selective laser melting of aluminium components J. Mater. Process. Technol. 211275-84 |
Wan X M, Feng Y, Lin X and Tan H 2019 Large superelastic recovery and elastocaloric effect in as-deposited additive manufactured Ni50.8Ti49.2 alloy Appl. Phys. Lett. 114221903 |
Shi G et al 2022 The interaction effect of process parameters on the phase transformation behavior and tensile properties in additive manufacturing of Ni-rich NiTi alloy J. Manuf. Process. 77539-50 |
Lou J, He H, Li Y M, Zhu C Q, Chen Z Y and Liu C 2016 Effects of high O contents on the microstructure, phase-transformation behaviour, and shape-recovery properties of porous NiTi-based shape-memory alloys Mater. Des. 10637-44 |
Nematollahi M, Saghaian S E, Safaei K, Bayati P, Bassani P, Biffi C, Tuissi A, Karaca H and Elahinia M 2021 Building orientation-structure-property in laser powder bed fusion of NiTi shape memory alloy J. Alloys Compd. 873159791 |
Frenzel J, Zhang Z, Somsen C, Neuking K and Eggeler G 2007 Influence of carbon on martensitic phase transformations in NiTi shape memory alloys Acta Mater. 551331-41 |
Zhang Y Q, Jiang S Y, Zhao Y N and Tang M 2012 Influence of cooling rate on phase transformation and microstructure of Ti-50.9%Ni shape memory alloy Trans. Nonferrous Met. Soc. China 222685-90 |
Michutta J, Carroll M C, Yawny A, Somsen C, Neuking K and Eggeler G 2004 Martensitic phase transformation in Ni-rich NiTi single crystals with one family of Ni4Ti3 precipitates Mater. Sci. Eng. A 378152-6 |
Yang Y, Zhan J B, Li B, Lin J X, Gao J J, Zhang Z Q, Ren L, Castany P and Gloriant T 2019 Laser beam energy dependence of martensitic transformation in SLM fabricated NiTi shape memory alloy Materialia 6100305 |
Bagheri A, Mahtabi M J and Shamsaei N 2018 Fatigue behavior and cyclic deformation of additive manufactured NiTi J. Mater. Process. Technol. 252440-53 |
Miyazaki S and Otsuka K 1986 Deformation and transition behavior associated with the R-phase in Ti-Ni alloys Metall. Mater. Trans. A 1753-63 |
Otsuka K and Ren X 2005 Physical metallurgy of Ti-Ni-based shape memory alloys Prog. Mater. Sci. 50511-678 |
Shayesteh Moghaddam N, Saghaian S E, Amerinatanzi A, Ibrahim H, Li P Z, Toker G P, Karaca H E and Elahinia M 2018 Anisotropic tensile and actuation properties of NiTi fabricated with selective laser melting Mater. Sci. Eng. A 724220-30 |
Yang K V, Rometsch P, Jarvis T, Rao J, Cao S, Davies C and Wu X H 2018 Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting Mater. Sci. Eng. A 712166-74 |
Carter L N, Martin C, Withers P J and Attallah M M 2014 The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy J. Alloys Compd. 615338-47 |
Prashanth K G, Scudino S and Eckert J 2017 Defining the tensile properties of Al-12Si parts produced by selective laser melting Acta Mater. 12625-35 |
Nishida M, Hara T, Matsuda M and Ii S 2008 Crystallography and morphology of various interfaces in Ti-Ni, Ti-Pd and Ni-Mn-Ga shape memory alloys Mater. Sci. Eng. A 481-48218-27 |
Wu Z G, Mahmud A, Zhang J S, Liu Y N and Yang H 2018 Surface oxidation of NiTi during thermal exposure in flowing argon environment Mater. Des. 140123-33 |
Yang C, Zhao Y J, Kang L M, Li D D, Zhang W W and Zhang L C 2018 High-strength silicon brass manufactured by selective laser melting Mater. Lett. 210169-72 |
Xu S S, Zhao Y, Chen D, Sun L W, Chen L, Tong X, Liu C T and Zhang Z W 2019 Nanoscale precipitation and its influence on strengthening mechanisms in an ultra-high strength low-carbon steel Int. J. Plast. 11399-110 |
Liu L F, Ding Q Q, Zhong Y, Zou J, Wu J, Chiu Y L, Li J X, Zhang Z, Yu Q and Shen Z J 2018 Dislocation network in additive manufactured steel breaks strength-ductility trade-off Mater. Today 21354-61 |
Yang C, Kang L M, Li X X, Zhang W W, Zhang D T, Fu Z Q, Li Y Y, Zhang L C and Lavernia E J 2017 Bimodal titanium alloys with ultrafine lamellar eutectic structure fabricated by semi-solid sintering Acta Mater. 132491-502 |
Zheng D, Li R D, Yuan T C, Xiong Y, Song B, Wang J X and Su Y D 2021 Microstructure and mechanical property of additively manufactured NiTi alloys:a comparison between selective laser melting and directed energy deposition J. Cent. South Univ. 281028-42 |
Liu Y N, Mahmud A, Kursawe F and Nam T H 2008 Effect of pseudoelastic cycling on the Clausius-Clapeyron relation for stress-induced martensitic transformation in NiTi J. Alloys Compd. 44982-87 |
Farjam N, Nematollahi M, Andani M T, Mahtabi M J and Elahinia M 2020 Effects of size and geometry on the thermomechanical properties of additively manufactured NiTi shape memory alloy Int. J. Adv. Manuf. Technol. 1073145-54 |
Chen Y C, Molnárová O, Tyc O, Kadeřávek L, Heller L and Šittner P 2019 Recoverability of large strains and deformation twinning in martensite during tensile deformation of NiTi shape memory alloy polycrystals Acta Mater. 180243-59 |
Šittner P, Molnárová O, Kadeřávek L, Tyc O and Heller L 2020 Deformation twinning in martensite affecting functional behavior of NiTi shape memory alloys Materialia 9100506 |
Shi X B, Hu Z C, Hu X W, Zhang J S and Cui L S 2017 Effect of plastic deformation on stress-induced martensitic transformation of nanocrystalline NiTi alloy Mater. Charact. 128184-8 |
Ezaz T, Sehitoglu H, Abuzaid W and Maier H J 2012 Higher order twin modes in martensitic NiTi-The (201-) case Mater. Sci. Eng. A 558422-30 |
Nishida M, Ii S, Kitamura K, Furukawa T, Chiba A, Hara T and Hiraga K 1998 New deformation twinning mode of B19' martensite in Ti-Ni shape memory alloy Scr. Mater. 391749-54 |
Chen Y C, Tyc O, Molnárová O, Heller L and Šittner P 2019 Tensile deformation of superelastic NiTi wires in wide temperature and microstructure ranges Shape Mem. Superelasticity 542-62 |
Heller L, Šittner P, Sedlák P, Seiner H, Tyc O, Kadeřávek L, Sedmák P and Vronka M 2019 Beyond the strain recoverability of martensitic transformation in NiTi Int. J. Plast. 116232-64 |
Hamilton R F, Palmer T A and Bimber B A 2015 Spatial characterization of the thermal-induced phase transformation throughout as-deposited additive manufactured NiTi bulk builds Scr. Mater. 10156-59 |
Yu C, Kang G Z, Song D and Kan Q H 2015 Effect of martensite reorientation and reorientation-induced plasticity on multiaxial transformation ratchetting of super-elastic NiTi shape memory alloy:new consideration in constitutive model Int. J. Plast. 6769-101 |
Karamooz-Ravari M R, Taheri Andani M, Kadkhodaei M, Saedi S, Karaca H and Elahinia M 2018 Modeling the cyclic shape memory and superelasticity of selective laser melting fabricated NiTi Int. J. Mech. Sci. 138-13954-61 |
Liu T, Wu Z G, Zhou W, Zhong M T, Lin J and Yang Y 2023 Quasilinear pseudoelasticity and small hysteresis in SLM-fabricated NiTi J. Alloys Compd. 933167694 |
Shi G F, Li L X, Yu Z L, Sha P W, Cao Q, Xu Z Z, Liu Y T, Guo Y T, Si J S and Liu J B 2023 Effect of crystallographic anisotropy on phase transformation and tribological properties of Ni-rich NiTi shape memory alloy fabricated by LPBF Opt. Laser Technol. 157108731 |
Elahinia M H, Hashemi M, Tabesh M and Bhaduri S B 2012 Manufacturing and processing of NiTi implants:a review Prog. Mater. Sci. 57911-46 |
Ma J, Karaman I and Noebe R D 2010 High temperature shape memory alloys Int. Mater. Rev. 55257-315 |
Yang Z, Cong D Y, Sun X M, Nie Z H and Wang Y D 2017 Enhanced cyclability of elastocaloric effect in boron-microalloyed Ni-Mn-In magnetic shape memory alloys Acta Mater. 12733-42 |
Saedi S, Turabi A S, Taheri Andani M, Haberland C, Karaca H and Elahinia M 2016 The influence of heat treatment on the thermomechanical response of Ni-rich NiTi alloys manufactured by selective laser melting J. Alloys Compd. 677204-10 |
Kaya I, Tobe H, Karaca H E, Acar E and Chumlyakov Y 2016 Shape memory behavior of [111]-oriented NiTi single crystals after stress-assisted aging Acta Metall. Sin. 29282-6 |
Guo W and Kato H 2015 Development of a high-damping NiTi shape-memory-alloy-based composite Mater. Lett. 1581-4 |
Krishna B V, Bose S and Bandyopadhyay A 2007 Laser processing of net-shape NiTi shape memory alloy Metall. Mater. Trans. A 381096-103 |
Chowdhury P, Ren G W and Sehitoglu H 2015 NiTi superelasticity via atomistic simulations Phil. Mag. Lett. 95574-86 |
Hamid N A 2019 NiTi and reused pseudo elastic reinforcing bar for improved cyclic strains, energy dissipation, damping properties and earthquake resilience Mol. Cryst. Liq. Cryst. 69553-77 |
van Humbeeck J and Kustov S 2005 Active and passive damping of noise and vibrations through shape memory alloys:applications and mechanisms Smart Mater. Struct. 14 S171-85 |
Chen Q F, Zuo X B, Wang L M, Chang W, Tian W Y, Li A Q, Yang H and Liu L H 2006 NiTi wire as a superelastic damping material in structural engineering Mater. Sci. Eng. A 438-4401089-92 |
Soul H, Isalgue A, Yawny A, Torra V and Lovey F C 2010 Pseudoelastic fatigue of NiTi wires:frequency and size effects on damping capacity Smart Mater. Struct. 19085006 |
Ou S F, Peng B Y, Chen Y C and Tsai M H 2018 Manufacturing and characterization of NiTi alloy with functional properties by selective laser melting Metals 8342 |
Villa F, Bassani E, Passaretti F, de Ceglia G, Viscuso S, Parkel T C and Villa E 2021 Damping properties of innovative NiTi elements:development of proof of concept and demonstrators Smart Mater. Struct. 30095009 |
Nespoli A, Bassani E, Torre D D, Donnini R, Villa E and Passaretti F 2017 An experimental study on pseudoelasticity of a NiTi-based damper for civil applications Smart Mater. Struct. 26105041 |
Nespoli A, Bettini P, Villa E, Sala G, Passaretti F and Grande A M 2021 A study on damping property of NiTi elements produced by selective laser-beam melting Adv. Eng. Mater. 232001246 |
Wu S K and Lin H C 2003 Damping characteristics of TiNi binary and ternary shape memory alloys J. Alloys Compd. 35572-78 |
de Wild M, Meier F, Bormann T, Howald C B C and Müller B 2014 Damping of selective-laser-melted NiTi for medical implants J. Mater. Eng. Perform. 232614-9 |
Yin H and Sun Q P 2012 Temperature variation in NiTi shape memory alloy during cyclic phase transition J. Mater. Eng. Perform. 212505-8 |
Zhang D Z, Li Y Z and Cong W L 2021 Multi-scale pseudoelasticity of NiTi alloys fabricated by laser additive manufacturing Mater. Sci. Eng. A 821141600 |
Farhang B, Ravichander B B, Venturi F, Amerinatanzi A and Shayesteh Moghaddam N 2020 Study on variations of microstructure and metallurgical properties in various heat-affected zones of SLM fabricated Nickel-Titanium alloy Mater. Sci. Eng. A 774138919 |
Biffi C A, Bassani P, Fiocchi J and Tuissi A 2020 Microstructural and mechanical response of NiTi lattice 3D structure produced by selective laser melting Metals 10814 |
Li S, Hassanin H, Attallah M M, Adkins N J E and Essa K 2016 The development of TiNi-based negative Poisson's ratio structure using selective laser melting Acta Mater. 10575-83 |
Speirs M, Van Hooreweder B, Van Humbeeck J and Kruth J P 2017 Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison J. Mech. Behav. Biomed. Mater. 7053-59 |
Yang X, Yang Q, Shi Y S, Yang L, Wu S Q, Yan C Z and Shi Y S 2022 Effect of volume fraction and unit cell size on manufacturability and compressive behaviors of Ni-Ti triply periodic minimal surface lattices Addit. Manuf. 54102737 |
Khademzadeh S 2022 Precision additive manufacturing of NiTi shape memory parts using micro-laser powder bed fusion Prog. Addit. Manuf. 7419-32 |
Xiong Z W, Li H H, Yang H, Yang Y, Liu Y N, Cui L S, Li X X, Masseling L, Shen L Y W and Hao S J 2022 Micro laser powder bed fusion of NiTi alloys with superior mechanical property and shape recovery function Addit. Manuf. 57102960 |
Liang H X, Yang Y W, Xie D Q, Li L, Mao N, Wang C J, Tian Z J, Jiang Q and Shen L D 2019 Trabecular-like Ti-6Al-4V scaffolds for orthopedic:fabrication by selective laser melting and in vitro biocompatibility J. Mater. Sci. Technol. 351284-97 |
Zhang B Q et al 2018 The biomimetic design and 3D printing of customized mechanical properties porous Ti6Al4V scaffold for load-bearing bone reconstruction Mater. Des. 15230-39 |
Morrish S J N, Pedersen M, Wong K F W, Todd I and Goodall R 2017 Size effects in compression in electron beam melted Ti6Al4V diamond structure lattices Mater. Lett. 190138-42 |
Yang L, Yan C Z, Fan H Y, Li Z Q, Cai C, Chen P, Shi Y S and Yang S F 2019 Investigation on the orientation dependence of elastic response in Gyroid cellular structures J. Mech. Behav. Biomed. Mater. 9073-85 |
Hedayati R, Sadighi M, Mohammadi-Aghdam M and Zadpoor A A 2016 Mechanics of additively manufactured porous biomaterials based on the rhombicuboctahedron unit cell J. Mech. Behav. Biomed. Mater. 53272-94 |
Wauthle R, Ahmadi S M, Amin Yavari S, Mulier M, Zadpoor A A, Weinans H, Van Humbeeck J, Kruth J P and Schrooten J 2015 Revival of pure titanium for dynamically loaded porous implants using additive manufacturing Mater. Sci. Eng. C 5494-100 |
Low L, Ramadan S, Coolens C and Naguib H E 2018 3D printing complex lattice structures for permeable liver phantom fabrication Bioprinting 10 e00025 |
Zhang X Y, Fang G, Xing L L, Liu W and Zhou J 2018 Effect of porosity variation strategy on the performance of functionally graded Ti-6Al-4V scaffolds for bone tissue engineering Mater. Des. 157523-38 |
Bobbert F S L, Lietaert K, Eftekhari A A, Pouran B, Ahmadi S M, Weinans H and Zadpoor A A 2017 Additively manufactured metallic porous biomaterials based on minimal surfaces:a unique combination of topological, mechanical, and mass transport properties Acta Biomater. 53572-84 |
Ma S et al 2020 Manufacturability, mechanical properties, mass-transport properties and biocompatibility of triply periodic minimal surface (TPMS) porous scaffolds fabricated by selective laser melting Mater. Des. 195109034 |
Kadkhodapour J, Montazerian H and Raeisi S 2014 Investigating internal architecture effect in plastic deformation and failure for TPMS-based scaffolds using simulation methods and experimental procedure Mater. Sci. Eng. C 43587-97 |
Zhang L, Song B, Choi S K, Yao Y G and Shi Y S 2022 Anisotropy-inspired, simulation-guided design and 3D printing of microlattice metamaterials with tailored mechanical-transport performances Composites B 236109837 |
Alaña M, Cutolo A, Probst G, Ruiz de Galarreta S and Van Hooreweder B 2020 Understanding elastic anisotropy in diamond based lattice structures produced by laser powder bed fusion:effect of manufacturing deviations Mater. Des. 195108971 |
Yang J X, Chen X H, Sun Y X, Zhang J F, Feng C, Wang Y M, Wang K and Bai L 2022 Compressive properties of bidirectionally graded lattice structures Mater. Des. 218110683 |
Habijan T, Haberland C, Meier H, Frenzel J, Wittsiepe J, Wuwer C, Greulich C, Schildhauer T A and Köller M 2013 The biocompatibility of dense and porous Nickel-Titanium produced by selective laser melting Mater. Sci. Eng. C 33419-26 |
Dadbakhsh S, Speirs M, Kruth J P and Van Humbeeck J 2015 Influence of SLM on shape memory and compression behaviour of NiTi scaffolds CIRP Ann. 64209-12 |
Lu H Z, Ma H W, Luo X, Wang Y, Wang J, Lupoi R, Yin S and Yang C 2021 Microstructure, shape memory properties, and in vitro biocompatibility of porous NiTi scaffolds fabricated via selective laser melting J. Mater. Res. Technol. 156797-812 |
Feng C, Zhang W J, Deng C J, Li G L, Chang J, Zhang Z Y, Jiang X Q and Wu C T 2017 3D printing of lotus root-like biomimetic materials for cell delivery and tissue regeneration Adv. Sci. 41700401 |
Wang X Y, Zhang M, Ma J G, Xu M C, Chang J, Gelinsky M and Wu C T 2020 3D printing of cell-container-like scaffolds for multicell tissue engineering Engineering 61276-84 |
Zhao M, Qing H, Wang Y X, Liang J, Zhao M, Geng Y L, Liang J Z and Lu B H 2021 Superelastic behaviors of additively manufactured porous NiTi shape memory alloys designed with Menger sponge-like fractal structures Mater. Des. 200109448 |
Guo Y T, Xu Z Z, Wang Q, Zu S, Liu M Q, Yu Z L, Zhang Z H and Ren L Q 2022 Corrosion resistance and biocompatibility of graphene oxide coating on the surface of the additively manufactured NiTi alloy Prog. Org. Coat. 164106722 |
Guo Y T, Xu Z Z, Liu M Q, Zu S, Yang Y N, Wang Q, Yu Z L, Zhang Z H and Ren L Q 2022 The corrosion resistance, biocompatibility and biomineralization of the dicalcium phosphate dihydrate coating on the surface of the additively manufactured NiTi alloy J. Mater. Res. Technol. 17622-35 |
Wu G L, Li L, Sun M, Wang Y, Luo F, Zhang Q L, Liu R, Chen Z J and Yao J H 2023 Microstructural evolution and biological properties of PEO coating on SLM-prepared NiTi alloy Surf. Coat. Technol. 452129065 |
Liu M L, Xu J and Li Q P 2021 Design and experiment of piezoelectric-shape memory alloy composite shock absorber Mater. Lett. 304130538 |
Xiong Z W et al 2021 3D-printing damage-tolerant architected metallic materials with shape recoverability via special deformation design of constituent material ACS Appl. Mater. Interfaces 1339915-24 |
Shaw J S and Wang C A 2019 Design and control of adaptive vibration absorber for multimode structure J. Intell. Mater. Syst. Struct. 301043-52 |
Braga M T, Alves M T S, Cavalini A A and Steffen V 2020 Influence of temperature on the passive control of a rotating machine using wires of shape memory alloy in the suspension Smart Mater. Struct. 29035040 |
Simiriotis N, Fragiadakis M, Rouchon J F and Braza M 2021 Shape control and design of aeronautical configurations using shape memory alloy actuators Comput. Struct. 244106434 |
Jani J M, Leary M and Subic A 2016 Fatigue of NiTi SMA-pulley system using taguchi and ANOVA Smart Mater. Struct. 25057001 |
Ge S S, Tee K P, Vahhi I E and Tay F E H 2006 Tracking and vibration control of flexible robots using shape memory alloys IEEE/ASME Trans. Mechatronics 11 690-8 |
Akbari S, Sakhaei A H, Panjwani S, Kowsari K and Ge Q 2021 Shape memory alloy based 3D printed composite actuators with variable stiffness and large reversible deformation Sens. Actuators A 321 112598 |
Sealy C 2021 Shape memory actuators drive micro-sized robots Nano Today 38 101167 |